Please report any broken links or trouble you might come across to the Webmaster. Please take a moment to let us know so that we can correct any problems and make your visit as enjoyable and as informative as possible.

NavSource Online: Army Ship Photo Archive


  • Built in 2011 as MV Clinton at Patti Marine Enterprises, Pensacola, FL.
  • Launched in 2011
  • Delivered to the US Army Corps of Engineers, 25 October 2011
  • Commissioned in October 2011, as USACE MV Clinton (II)
  • Current Disposition, active in commission
    Displacement 132 t.
    Length 65'
    Beam 24'
    Depth of Hold 8'6"
    Draft 6'5" full load
    Crew 6
    Fuel Oil - 9300 gals.
    Lube Oil - 350 gals.
    Potable Water - 1,600 gals.
    Electronics - E&R Marine Electronics (Furuno)
    Main Engines - two CAT C18B diesel engines, 600hp @ 1,800 rpm
    Propellers - two Michigan Wheel 54" diameter 5 blade, Progressive/Variable Pitch Design, CF-3 stainless steel
    Generator sets - two CAT C4.4, 76KW @ 1,800 RPM
    Deck Machinery
    Crane - one Stellar 5200 10 ft. 25,000 lbs
    Barge Wenches - two Winteck mdl. 311-RC 5 HP, 40 ton

    Click On Image
    For Full Size Image
    Size Image Description Source
    Clinton (II)
    73k USACE MV Clinton(II) underway date and location unknown
    US Army Corps of Engineers photo
    John Spivey
    Clinton (II)
    Clinton (II)
    65k USACE MV Clinton(II) drydocked, date and location unknown.
    Photo by CAPT. Billy Smith. Courtesy
    Robert Hurst

    There is no history available for USACE MV Clinton (II) at NavSource
    Back To The Navsource Photo Archives Main Page Back To The US Army Ship Index Back To The US Army Towboat Index
    Comments, Suggestions, E-mail Webmaster.
    This page is created and maintained by Gary P. Priolo
    All pages copyright NavSource Naval History
    Last Updated 4 October 2022